It’s too hot outside, and you are already exhausted after a long day at the office. But relaxing in a cold ambiance at home is the only thing that motivates you to return home. But as soon as you switch on the AC, it malfunctions and shuts down. What should be your next move?
Instead of cursing your luck, think of solutions. Even though it can be a minor issue, never take things into your own hands, especially with regard to electrical equipment. Always call an air conditioner repair expert to troubleshoot and fix the problem.
5 Minor Issues That Need Air Conditioner Repair Technician
Here are the top five minor AC-related issues, but ignoring them can lead to malfunctioning units.
1. Check the Thermostat Settings
One of the most frequent causes of the failure of an air conditioning unit is that its thermostat isn’t calibrated properly. Check the mode setting on the remote and ensure the ‘cool’ option is selected. The temperature set inside should always be less than the current room temperature. However, if the mode is cold and the unit still malfunctions, call a technician immediately.
Check Thermostat Power Source
If your thermostat runs on batteries, then check its status. Weak or dead batteries can cause the thermostat to malfunction. Replace the old batteries if you haven’t done that in a while.
2. Inspect the Air Filter
An obstructed air filter can decrease the cooling ability of an air conditioning unit. If the filter is dirty, the airflow will be restricted, making it difficult for the AC unit to perform perfectly.
How to Clean or Replace the Filter?
The air filters should be cleaned or changed once every two to three months. If you are sure the issue is the dirty air filter, call a professional to inspect it and replace it with another one. They will also advise you on whether the filter can be reused or not.
3. Check for Circuit Breaker Issues
The operation of the air conditioning unit may be interrupted due to the tripping of the circuit breaker. It may occur due to excessive load on the system or sudden electrical spikes. This is something that’s risky, and you need a professional for assistance.
Avoid Frequent Tripping
Circuit breakers and fuses are designed to protect electrical devices from overload. They trip when abnormal conditions occur. If the circuit goes off more than once, there is something wrong with the electrical wiring. All you need to do is call an air conditioner repair expert and look into circuits and wiring. Never do it yourself.
4. Inspect the Outdoor Unit
The air conditioner outdoor unit has to be well-ventilated during operation. The unit can malfunction with dirt, leaves, or debris, leading to faulty AC functioning. Call a technician to clear a 2 to 3-foot radius for the AC to work properly.
5. Check for Ice on the AC Unit
Is your indoor unit throwing water instead of the outdoor unit? Chances are, there is ice along your unit’s evaporative coil or refrigerant pipes. Never pour hot water to melt the ice away. Instead, contact a certified technician to handle the crisis.
How to Resolve the Issue?
Your technician will switch off the AC unit; once all the ice has melted away, they will switch it on. If the air conditioner returns to normal functionality, this could have been temporary interference, such as a clogged filter or airflow restriction.
Conclusion
Problems with AC can be annoying, especially if it’s too hot outside. Luckily, with the right knowledge, you can understand the issue beforehand and not underestimate it to be a minor error. Contact a professional from EG Technician Solution to have your air conditioner repaired with ease.